Posts Tagged ‘pool cove sticks’

Where to Buy Aboveground Swimming Pool Cove Sticks

January 7, 2011

When you purchase a replacement swimming pool liner, it’s a great idea to add the Peel and Stick Swimming Pool Cove.

In order to keep the swimming pool liner in place and protect the structure of the pool wall and liner, most people tend to build a sand or dirt cove that could easily be washed out; causing a lot of stress to the vinyl liner.  Pool Cove Sticks  solves that problem.  Peel n Place Aboveground Swimming Pool Cove is an economical alternative to sand and dirt cove and can be installed easily.

The cove sticks are easy to install; just release the backing and position on the clean and dry postion.  The tacky adhesive backing will hold the lightweight, flexible cove sections in place until the liner is filled with water.

  • Tacky adhesive backing
  • Flexible and Lightweight
  • Eliminates tons of dirt
  • Adheres to pool wall
  • Installs quick and easy
  • Does not wash out
  • Easy to work with 4 foot sections
  •  

    Advertisements

    Do I need to use pool cove with an above ground swimming pool?

    December 28, 2010

    Do I need to use pool cove with an above ground swimming pool?

    Yes, Pool Cove is very useful when installing an aboveground swimming pool liner.

    Pool Cove sticks ensure that the pool liner is installed correctly.  Cove keeps the liner in the correct place at the bottom of the pool wall. 

    Pool Cove will not wash out like sand or dirt you build by hand .  A SMALL INVESTMENT THAT WILL ADD YEARS TO THE LIFE OF YOUR ABOVE-GROUND LINER!

    Make sure the place pool cove around the bottom, inside circumference of your pool wall before installing your new liner. Pool cove will help prevent excessive stretching and premature wearing, adding years to the life of your new swimming pool liner . Peel & Stick pool cove has an adhesive backing for quick, easy installation. 48” length.

    Swimming Pool Cove Sticks

    Swimming Pool Cove Sticks

    Do I need Pool Cove?

    November 16, 2009

    Peel and Stick Pool Cove for Above Ground Pools is an important step when you change or put in an above ground swimming pool liner.

    Pool cove keeps the vinyl liner in place on the bottom of the walls. Without cove, the weight of the water can push the liner against the wall causing stress to the pool itself or under the frame.

    In the past, people had to use sand or dirt to build up the area. This is labor intensive and the dirt can easily washout leaving you with a liner failure. Gladon solves this problem with their Peel and Stick Pool Cove. The swimming pool cove is made from a foam like material and has a tacky adhesive backing so you can stick the cove in place.

    The pool cove molding is economical, lightweight, flexible, and easy to install.

    Click here to learn How To Install Swimming Pool Cove

    At http://www.megapoolandspa.com, we have the cheapest price on the internet for all your above ground swimming pool vinyl liner replacement accessories.

    Gladon Perfect Pool Bottom Kit – Above Ground Swimming Pool Liner Pad with Pool Cove

    October 10, 2008

    The Perfect Pool Bottom Kit for Above Ground Swimming Pool Liners is available at http://www.megapoolandspa.  We have tons of sizes and deliver to your door in days.

    If you have problems with nutgrass, this is the solution for your above ground liner. Perfect Pool Bottom is an entire kit designed to totally protect your new liner and add years of life. The heart of this liner kit is perfect bottom hard, flat polymer that is placed under your pool to form a smooth bottom and protect your liner. Nothing can get through the Gladon Perfect Pool Bottom, not roots, stones, glass or even NUTGRASS! With Perfect Pool Bottom even footprints are eliminated. Also included in the kit is pool cove which is used around the perimeter of the inside wall of your pool to protect your liner. Pool cove eliminates excessive liner stretch to prolong your liner’s life.

    The Perfect Pool Bottom kit is easy to install and comes in different pool sizes. If you are looking to prevent nutgrass then this kit is for you.


    Click Here to Read The Perfect Pool Bottom Installation Instructions

    Gladon Perfect Pool Bottom Kit

    September 4, 2008

    Gladon Pool Products make great accessories for your swimming pool liner installation job and at http://www.megapoolandspa.com , we sell all of their products at Low Prices!!!

    The Perfect Pool Bottom is an entire kit designed to totally protect your new liner and add years of life.

    The heart of this liner kit is perfect bottom hard, flat polymer that is placed under your pool to form a smooth bottom and protect your liner. Nothing can get through Perfect Pool Bottom, not roots, stones, glass or even NUTGRASS! With Perfect Pool Bottom even footprints are eliminated. Also included in the kit is pool cove which is used around the perimeter of the inside wall of your pool to protect your liner. Pool cove eliminates excessive liner stretch to prolong your liner’s life.

    The Perfect Pool Bottom kit is easy to install and comes in different pool sizes. If you are looking to prevent nutgrass then this kit is for you.

    How do you install above ground swimming pool Pool Cove?

    September 4, 2008

    Pool Cove is an important product to use when you replace your above ground swimming pool liner.  The cove sticks are placed on the floor of the pool against the wall.  They create way for the liner to rest against the pool walls without putting a lot of stress agianst the wall itself.  Pool Cove manufactured by Gladon is made from a foam type of material that will not wash away like dirt or sand cove you build by hand.

    At Mega Pool and Spa, we sell Peel and Place Pool Cove and Clip and Place Pool Cove

    Here are detailed instructions on how to install swimming pool cove sticks.

    • You will need a hacksaw to trim pieces if needed and optional snips.
    • Make sure you have a nice level 4″ wide section of ground around the pool wall.
    • Locate the pool wall joint and center a section of pool cove.
    • Press the cove against the wall and and make sure the plastic backing goes between the inner wall and bottom rail.
    • Continue placing the cove sticks around the entire pool making sure there are no gaps or spaces between the cove sticks.
    • Before installing the last stick of cove, make sure all pieces fit tightly next to each other.
    • Cut your last piece of cove about 1.5″ longer than needed.  This tight fit is recommend because you will fill the pool with water and the wall will stretch.

    What is Pool Cove and do I need to use it when replacing a swimming pool liner?

    May 18, 2008

    Peel and Stick Pool Cove for Above Ground Pools is an important step when you change or put in an above ground swimming pool liner.

    Pool cove keeps the vinyl liner in place on the bottom of the walls. Without cove, the weight of the water can push the liner against the wall causing stress to the pool itself or under the frame.

    In the past, people had to use sand or dirt to build up the area. This is labor intensive and the dirt can easily washout leaving you with a liner failure. Gladon solves this problem with their Peel N Place Pool Cove. The swimming pool cove is made from a foam like material and has a tacky adhesive backing so you can stick the cove in place.

    The cove is economical, lightweight, flexible, and easy to install.

    Click here to learn How To Install Swimming Pool Cove

    At http://www.megapoolandspa.com, we have the cheapest price on the internet for all your above ground swimming pool vinyl liner replacement accessories.