How do you install above ground swimming pool Pool Cove?

Pool Cove is an important product to use when you replace your above ground swimming pool liner.  The cove sticks are placed on the floor of the pool against the wall.  They create way for the liner to rest against the pool walls without putting a lot of stress agianst the wall itself.  Pool Cove manufactured by Gladon is made from a foam type of material that will not wash away like dirt or sand cove you build by hand.

At Mega Pool and Spa, we sell Peel and Place Pool Cove and Clip and Place Pool Cove

Here are detailed instructions on how to install swimming pool cove sticks.

  • You will need a hacksaw to trim pieces if needed and optional snips.
  • Make sure you have a nice level 4″ wide section of ground around the pool wall.
  • Locate the pool wall joint and center a section of pool cove.
  • Press the cove against the wall and and make sure the plastic backing goes between the inner wall and bottom rail.
  • Continue placing the cove sticks around the entire pool making sure there are no gaps or spaces between the cove sticks.
  • Before installing the last stick of cove, make sure all pieces fit tightly next to each other.
  • Cut your last piece of cove about 1.5″ longer than needed.  This tight fit is recommend because you will fill the pool with water and the wall will stretch.
Advertisements

Tags: , , , , , , , , ,


%d bloggers like this: